From 2DogRC:
We just received these little kits in and WOW they are impressive! Each kit comes fully assembled with Naze Rev6B flight controller, motors, 20A ESC’s 200 mW video transmitter, 600 TVL camera and mount! All you need to do is strap on a receiver, set up Cleanflight how you like it and go fly!
The Tyrant’s have a power distribution board incorporated in their 4mm. This provides power to the ESCs and other items. Diatone did a great job in making this upgradable as well. If better parts come along in the future every thing is upgradable, without have to buy a whole new PDB!
We have a limited supply with more arriving at the end of April!
Diatone Tyrant 180 PNF-Green Quad
These are the newly released Diatone Tyrant series. These come pre-assembled and only require a receiver and battery! You will not be disappointed with this arf! The brains of this setup is the Naze32 Rev 6B, with easy pin connectors. This makes setting up your ship extremely easy! The power distribution board has a 5 and 12V regulator to power the camera and video TX. The frame is a sold 4mm Carbon fiber which is extremely solid! The video transmitter is a full 40 Channel with Raceband. You also get an antenna. There is 1 set of props included, a allen head wrench and battery straps.
Features:
Motor: 4-2204 2300KV
ESC: 4S 20A (BL HELI)
FC: Naze32 REV6 6DF, with 16M flash!
Camera : Mini 600TVL 120°
Video Transmitter: 5.8G 200mW 40CH
Propeller: 4025 Durable series
Built in 5V and 12V 2A BEC
Built in Low Voltage Alarm and Buzzer set at 3.75V/cell
DT-PA0003-G – $234.99
Diatone Tyrant 150 PNF-Orange Quad
These are the newly released Diatone Tyrant series. These come pre-assembled and only require a receiver and battery! These are the newly released Diatone Tyrant series. These come pre-assembled and only require a receiver and battery! You will not be disappointed with this arf! The brains of this setup is the Naze32 Rev 6B, with easy pin connectors. This makes setting up your ship extremely easy! The power distribution board has a 5 and 12V regulator to power the camera and video TX. The frame is a sold 4mm Carbon fiber which is extremely solid! The video transmitter is a full 40 Channel with Raceband. You also get an antenna. There is 1 set of props included, a allen head wrench and battery straps.
Features:
Motor: 4-1306 3100KV
ESC: 4S 20A (BL HELI)
FC: Naze32 REV6 6DF 16M on board flash
On board 5V and 12V regulator up to 2A.
Camera : Mini 600TVL 120°
Video Transmitter: 5.8G 200mW 40CH
Propeller: 3030 Durable series
DT-PA0002-O – $234.99
Visit 2DogRC.com
See more posts about 2DogRC
Hey, do you know if the stock camera and vtx are compatible with fat shark dominator v3s, with a nexwaveRF FSV2442 module? Also what frequency is the antenna on the vtx? Thanks.